China wholesaler M4505132es3a Gear Reducer of Screw Conveyor for 219mm Screw Feeders gear cycle

Product Description

Product Description

DESCRIPTION:
Gear reducers are enclosed helical gears with hollow inputs.
The gear is mounted directly on the input shaft of the gear and receives support from a motor mounting bracket mounted on the machine housing. 
No additional parts are required to transfer torque from the reducer to the machine.
It can be mounted in vertical, horizontal or inclined position.
Shaft-mounted gear reducers typically have 5:1 7:1 10:1 reduction ratios and output speeds ranging from 1 to 300 rpm.

M4 series gear reducer can be installed directly on screw conveyors and feeders with a XUH seal installed on the output shaft of the gearbox. 
Ensure that cement, and fly ash powder will not get into the gearbox and extend the service life of the gearbox.
More suitable for bulk materials, grain and aggregate handling industries

 

WORKING PRINCIPLE:
M4 series gearboxes come in 5 sizes (M41 / M43 / M45 / M47 / M49). 
Nominal gear ratios are in accordance with Ra 10 CHINAMFG 2017 (5, 6, 7, 10). Cylindrical gears with helicoidal teeth. 
M4 series gearboxes can be mounted directly on screws: in this case, the XUH type output shaft seal is usually installed. 
M4 series gearboxes are supplied with grease for use at ambient temperatures (0°C – 40°C).

PROPERTIES:
– Helical gearbox
– Nominal torque that can be transferred to the output shaft: up to 1500 Nm.
– Installed power at the input up to 30 kW.
– Operation at ambient temperature (0°C – 40°C).
– DIN 5482 involute spline output shafts
– Flange mounting on motor and output side
– Precision-machined cylindrical bevel gears with teeth.
– Flange mounting on motor and output side

BENEFITS:
– Easy installation
– Quick maintenance
– Low installation costs

 

 

 

Services

 

Pre-sales Commitment

1. For user inquiries, quick response, warm reception, and answer all questions.
2. Provide detailed design information free of charge within 24 hours.

Commitment in Sales

1. All ex-factory products meet the quality standards specified in the contract. All products are tested according to customer requirements before delivery.
2. After the contract is signed, the customers are welcome to the site of our company for supervision.

After-sales Commitment

1. We provide technical support for customers. If necessary, the product can be debugged on-site, and relevant operators can be trained to solve user problems.
2.  24 hours to solve the problems for customers. Product use a day, a day of service.
3. Set up a high-quality service team, and set up product files for regular return visits.

Application: Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Four-Step
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

screw gear

What are the advantages and disadvantages of using screw gears?

Using screw gears, also known as worm gears, offers several advantages and disadvantages. These gears have unique characteristics that make them suitable for specific applications but may also present limitations in certain scenarios. Here’s a detailed explanation of the advantages and disadvantages of using screw gears:

Advantages:

  • High Gear Ratio: Screw gears provide high gear ratios, meaning that a small rotation of the worm gear can result in a significant rotation of the worm wheel. This high gear ratio allows for precise control and slow movement, making screw gears suitable for applications that require fine adjustments and positioning accuracy.
  • Self-Locking: Screw gears have a self-locking characteristic, which means that they can hold their position without the need for additional braking mechanisms or external locking devices. This feature is particularly useful in applications where load holding or preventing back-driving is essential, such as in lifting systems or incline conveyors.
  • Compact Design: Screw gears have a compact design due to their single-threaded helical shape. This compactness allows for space-saving installations, making screw gears advantageous in applications with limited space or tight packaging requirements.
  • Quiet Operation: Screw gears typically operate with reduced noise levels compared to other gear types. The sliding contact between the worm gear and the worm wheel results in less gear mesh noise, making screw gears suitable for applications that require low noise levels or quiet operation.

Disadvantages:

  • Lower Mechanical Efficiency: Screw gears generally have lower mechanical efficiency compared to other gear types, such as spur gears or helical gears. The sliding motion between the worm gear and the worm wheel generates more friction, leading to energy losses and reduced efficiency. However, advancements in gear design, materials, and lubrication can help mitigate this disadvantage to some extent.
  • Limited Power Transmission Capacity: Screw gears are typically not suitable for high-power transmission applications. Due to the sliding contact and high gear ratios, they may have limitations in terms of torque capacity. In high-power applications, other gear types, such as spur or helical gears, are often preferred due to their higher load-carrying capabilities.
  • Potential Backlash: Screw gears can exhibit backlash, which refers to the play or clearance between the mating teeth of the worm gear and the worm wheel. Backlash can lead to reduced accuracy, vibration, and inefficient power transmission. Minimizing backlash through precise manufacturing and proper gear meshing is crucial to mitigate this issue.
  • Requires Proper Lubrication: Screw gears rely on adequate lubrication to minimize friction and ensure smooth operation. Proper lubrication is essential to prevent excessive wear, overheating, and premature failure. Regular maintenance and lubrication checks are necessary to maintain the efficiency and lifespan of screw gear systems.
  • Manufacturing Complexity: The manufacturing process of screw gears can be more complex compared to other gear types. Achieving precise gear tooth profiles and maintaining proper gear meshing requires careful machining and specialized equipment. This complexity can increase manufacturing costs and lead times.

When considering the use of screw gears, it is important to evaluate the specific requirements of the application, such as the need for high gear ratios, load capacity, positional accuracy, and noise levels. By carefully assessing the advantages and disadvantages, engineers can determine whether screw gears are the most suitable choice for their particular application.

screw gear

How do you calculate the efficiency of a screw gear?

Calculating the efficiency of a screw gear, also known as a worm gear, involves determining the ratio of input power to output power and considering various factors that affect the overall efficiency of the gear system. Here’s a detailed explanation of how to calculate the efficiency of a screw gear:

  1. Measure Input Power: The first step is to measure or determine the input power to the screw gear system. This can be done by measuring the torque applied to the input shaft and the rotational speed of the input shaft. The input power can then be calculated using the formula: Input Power (Pin) = Torque (Tin) × Angular Speed (ωin).
  2. Measure Output Power: Next, measure or determine the output power of the screw gear system. This can be done by measuring the torque exerted by the output shaft and the rotational speed of the output shaft. The output power can be calculated using the formula: Output Power (Pout) = Torque (Tout) × Angular Speed (ωout).
  3. Calculate Mechanical Efficiency: The mechanical efficiency of the screw gear system is calculated by dividing the output power by the input power and multiplying the result by 100 to express it as a percentage. The formula for mechanical efficiency is: Mechanical Efficiency = (Pout/Pin) × 100%.
  4. Consider Efficiency Factors: It’s important to note that the mechanical efficiency calculated in the previous step represents the ideal efficiency of the screw gear system, assuming perfect conditions. However, several factors can affect the actual efficiency of the system. These factors include friction losses, lubrication efficiency, manufacturing tolerances, and wear. To obtain a more accurate assessment of the overall efficiency, these factors should be considered and accounted for in the calculations.
  5. Account for Friction Losses: Friction losses occur in screw gear systems due to the sliding contact between the worm gear and the worm wheel. To account for friction losses, a correction factor can be applied to the calculated mechanical efficiency. This correction factor is typically determined based on empirical data or manufacturer specifications and is subtracted from the mechanical efficiency to obtain the corrected efficiency.
  6. Consider Lubrication Efficiency: Proper lubrication is essential for reducing friction and improving the efficiency of screw gear systems. In practice, the lubrication efficiency can vary depending on factors such as the type of lubricant used, the lubrication method, and the operating conditions. To account for lubrication efficiency, a lubrication factor can be applied to the corrected efficiency calculated in the previous step. This factor is typically determined based on experience or manufacturer recommendations.
  7. Include Other Efficiency Factors: Depending on the specific application and the characteristics of the screw gear system, additional efficiency factors may need to be considered. These factors can include manufacturing tolerances, gear wear, misalignment, and other losses that can affect the overall efficiency. It’s important to assess these factors and apply appropriate correction factors or adjustments to the efficiency calculation.

By following these steps and considering the various factors that affect the efficiency of a screw gear system, it is possible to calculate a more accurate estimate of the gear’s efficiency. Keep in mind that the calculated efficiency is an approximation, and actual efficiency can vary based on operating conditions, maintenance practices, and other factors specific to the gear system and application.

screw gear

How do you choose the right size screw gear for your application?

Choosing the right size screw gear for your application involves considering several factors to ensure optimal performance and compatibility. Here are the key steps to follow when selecting a screw gear:

  1. Determine the Application Requirements: Start by understanding the specific requirements of your application. Consider factors such as the desired gear reduction ratio, torque requirements, rotational speed, load capacity, and precision positioning needs. Having a clear understanding of your application’s requirements will help guide the selection process.
  2. Calculate the Gear Ratio: Determine the required gear reduction ratio by considering the speed and torque specifications of your application. The gear reduction ratio is calculated by dividing the input speed by the output speed. This ratio will help narrow down the options for suitable screw gears.
  3. Evaluate Load Capacity: Assess the load capacity requirements of your application. Consider the maximum load that the screw gear needs to handle. This includes both the static load (the load when the system is at rest) and the dynamic load (the load during operation). Ensure that the selected screw gear can handle the anticipated loads without experiencing excessive wear or failure.
  4. Consider Torque Requirements: Determine the required torque output of the screw gear to meet the demands of your application. Calculate the torque by multiplying the load torque by the gear reduction ratio. Ensure that the selected screw gear can provide the necessary torque output to drive the load effectively.
  5. Analyze Speed and Efficiency: Evaluate the desired rotational speed and efficiency of the screw gear system. Consider the input speed, output speed, and efficiency requirements of your application. Ensure that the selected screw gear can operate within the desired speed range while maintaining the required efficiency levels.
  6. Check Mounting and Space Constraints: Assess the available space and mounting requirements in your application. Consider factors such as the required size, shape, and mounting configuration of the screw gear. Ensure that the selected screw gear can be properly installed and integrated into your application without any space or mounting constraints.
  7. Consider Material and Lubrication: Evaluate the environmental conditions and operating parameters of your application. Consider factors such as temperature, humidity, exposure to contaminants, and the need for corrosion resistance. Select a screw gear made from materials suitable for the application environment. Additionally, consider the lubrication requirements and ensure that the selected screw gear can be adequately lubricated for smooth operation and reduced wear.
  8. Consult Manufacturers and Suppliers: Seek advice and consult with manufacturers or suppliers of screw gears. They can provide valuable insights and recommendations based on their expertise and product knowledge. Provide them with the specific details of your application requirements for better guidance in selecting the appropriate screw gear.

By following these steps and considering the factors mentioned, you can choose the right size screw gear that matches the requirements of your application. It is crucial to ensure that the selected screw gear can handle the load, provide the necessary torque and speed, fit within the available space, and operate effectively in the application environment.

China wholesaler M4505132es3a Gear Reducer of Screw Conveyor for 219mm Screw Feeders gear cycleChina wholesaler M4505132es3a Gear Reducer of Screw Conveyor for 219mm Screw Feeders gear cycle
editor by CX 2023-10-26